Make Your Own Diagnostic Equipment (MYODE) by Concepcion Mandy

Author:Concepcion, Mandy [Concepcion, Mandy]
Language: eng
Format: mobi
Tags: automotive relay, auto repair equipment, auto repar, Auto scan tool, auto technician training, Mandy Concepcion, auto diagnostics, auto training, equipment, Modis scanner, obd22 scan tool, electrical repair, auto scanner, relays, Serie de Reparacion de Chapisteria, automotive repair
Publisher: www.autodiagnosticsandpublishing.com
Published: 2013-01-10T16:00:00+00:00

Previously, we explained the construction of the Parasitic Draw Amp-Meter. We will now explain how this tool can be used to it’s maximum ability and different uses. For the record, you will need three things, a wiring diagram, the Parasitic Draw Amp-Meter, and common sense.

To use the Parasitic Draw Amp-Meter, you must remove the positive or negative battery terminal, and connect the unit in series with the rest of the electrical system. We’ll use the positive side in our diagram, but ether one is fine. In this way, any and all flowing electrons will have to go through the Parasitic Draw Amp-Meter. As soon as this happens, current flowing through the 1 Ohm resistor will register at the meter needle.

Once connected, the Parasitic Draw Amp-Meter’s needle will start fluctuating a bit. This is the result of the different modules powering On, Off and then going to Standby. Do not disconnect and re-connect fuses randomly. This will only reset the modules or computers. Some of these may take a long time to go into standby.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.